RESUME Dr. Güralp Özkoç was born in 1979 in Sinop, Turkey. He received his B.Sc. degree from Gazi University and his M.Sc. and Ph.D. (2007) degrees from the Polymer Science and Technology Department of Middle East Technical University (ODTU) in Ankara, Turkey. During his PhD study he conducted a research as an intern-PhD at DSM in 2005 in The Netherlands. His PhD thesis was on the ‘processing and characterization of short glass fiber and nanoclay reinforced ABS/PA6 blends’. He also focused on the disoersion characteristics of nanoclays and polymer phases of ABS and PA6 with respect to microcompounding conditions. After his PhD graduation, he started as an Assistant Professor at Kocaeli University (KOU), Department of Chemical Engineering in 2007. He founded the Plastics and Rubber Technology Research Group in 2008 at KOU, where currently 50+ MSc and PhD students are actively conducting research. He supervised more than 35 M.Sc. and 15 Ph.D. theses in the last 10 years. Furthermore, he chaired the Polymer Science and Technology Graduate Program for 7 years from 2011 to 2018, and took role as the Vice Director at Natural and Applied Science Institute of KOU for 4 years. In 2013, Dr. Ozkoc decided to initiate an R&D company with his colleague to transfer the low TRL research into applied research. This attempt resulted in very fruitful collaborations with national and multinational companies. In 2019, he has been promoted to a full-professorship position in Kocaeli University. In September 2020, he moved to The Netherlands to conduct research on additive manufacturing of polymer composites at for TNO-Brightlands Material Center as a senior researcher. In 2021, Dr. Ozkoc started as a full professor at Istinye Univetsity Department of Chemistry. He holds 6 patents, and he is the author of many international scientific papers and proceedings. His h-index is currently 27. Dr. Güralp Özkoç’s research interests are polymer compounding, polymer blending, composites and nanocomposites, elastomeric/rubber compounds, biodegradable and biomedical materials.
Araştırma Alanları
- Polimer Bilimi ve Teknolojisi
- Polimer Kimyasi
- Polimer Teknolojisi
- Kimya Muhendisligi
- Preparation and characterization of poly(lactic acid)-based contact-active antimicrobial surfaces, 2023
- Unlocking the Potential Use of Reactive POSS as a Coagent for EPDM/PP-Based TPV, 2023
- Novel and eco-friendly hydrophobic treatment of cotton and polyester fabrics based-on octavinyl and aminopropylisobutyl polyhedral oligomeric silsesquioxanes (OL-POSS and AM-POSS), 2023
- Reactive compatibilization of PLA/PBS bio‐blends via a new generation of hybrid nanoparticles, 2023
- Miscibility and phase behavior of reactively compatibilized poly(lactic acid)/poly(butylene succinate) bio‐blends using various rheological analyses, 2023
- Shape memory behavior and physical properties of peroxide X-linked LLDPE-C6/POSS and LLDPE-C8/POSS composites, 2023
- Solid particle erosion and scratch behavior of novel scrap carbon fiber/glass fabric/polyamide 6.6 hybrid composites, 2023
- A comprehensive review of the recent developments in thermoplastics and rubber blends‐based composites and nanocomposites, 2023
- Improved Heat Dissipation of NR/SBR-Based Tire Tread Compounds via Hybrid Fillers of Multi-Walled Carbon Nanotube and Carbon Black, 2023
- Effects of Hybrid POSS Nanoparticles on the Properties of Thermoplastic Elastomer-Toughened Polyamide 6, 2023
- Processing and Characterization of UV Irradiated HDPE/POSS Fibers, 2023
- A review on polyhedral oligomeric silsesquioxanes as a new multipurpose nanohybrid additive for poly(lactic acid) and poly(lactic acid) hybrid composites, 2022
- A novel practical approach for monitoring the crosslink density of an ethylene propylene diene monomer compound: Complementary scanning acoustic microscopy and FIB-SEM-EDS analyses, 2022
- A new approach for the reuse of scrap carbon fiber in high-added value continuous fiber reinforced composite structures, 2022
- Improving bonding strength of injection Overmolded composites, 2022
- Reactive compatibilization of biodegradable PLA/TPU blends via hybrid nanoparticle, 2021
- The outstanding interfacial adhesion between acrylo-POSS/natural rubber composites and polyamide-based cords: ‘An environmentally friendly alternative to resorcinol-formaldehyde latex coating’, 2021
- Effects of OV-POSS Nanoparticles on The Vulcanization Kinetics of Natural Rubber Compounds, 2021
- Lab-Scale Twin-Screw Micro-Compounders as a New Rubber-Mixing Tool: \u2018A Comparison on EPDM/Carbon Black and EPDM/Silica Composites\u2019, 2021
- EKMEK ATIKLARINDAN TERMOPLASTİK NİŞASTA ELDESİ VE DÜŞÜK YOĞUNLUKLU POLİETİLEN İLE HARMANLARININ ÖZELLİKLERİNİN İNCELENMESİ, 2021
- Crosslinked Low-Density Polyethylene/Polyhedral Oligomeric Silsesquioxanes Composites: Effects of Crosslinker Concentration on the Mechanical, Thermal, Rheological, and Shape Memory Properties, 2021
- Effect of Octavinyl-Polyhedral Oligomeric Silsesquioxane on the Cross-linking, Cure Kinetics, and Adhesion Properties of Natural Rubber/Textile Cord Composites, 2020
- Investigation of shape memory behavior and physical properties of crosslinked low density polyethylene/OvPOSS/TAIC composites, 2020
- Cross-linked LLDPE composites in the presence of POSS nanoparticles and poly(ethylene glycol) dimethacrylate coagent: “Comparison of physical properties and shape memory behaviour”, 2020
- POSS nanoparticles as a potential compatibilizer for natural rubber/butadiene rubber blends, 2020
- Improved interfacial adhesion with the help of functional polyhedral oligomeric silsesquioxanes in silicone rubber/rayon fiber composites: Physical, mechanical, thermal, and morphological properties, 2020
- Polyimide nanocomposites in ternary structure: “A novel simultaneous neutron and gamma‐ray shielding material”, 2020
- A comprehensive study on shape memory behavior of PEG plasticized PLA/TPU bio-blends, 2020
- Additive manufacturing and biomechanical validation of a patient‐specific diabetic insole, 2020
- Polypropylene/Spray Dried and Silane-Treated NanofibrillatedCellulose Composites, 2020
- Overmolded polylactide/jute-mat eco-composites: A new method toenhance the properties of natural fiber biodegradable composites, 2020
- The Potential Use of Epoxy‐POSS as a Reactive Hybrid Compatibilizers for PLA/PBAT Blends: “Effect of PBAT Molecular Weight and POSS Type”, 2020
- Overmolded hybrid composites of polyamide-6 on continuous carbon and glass fiber/epoxy composites: ’xxAn assessment of the interface’xx, 2020
- Effects of hot melt adhesives on the interfacial properties of overmolded hybrid structures of polyamide-6 on continuous carbon fiber/epoxy composites, 2020
- Mechanical, thermal and morphological properties of poly(lactic acid) by using star-shaped poly(ε-caprolactone) with POSS core, 2019
- The Potential Use of Epoxy‐POSS as a Reactive Hybrid Compatibilizers for PLA/PBAT Blends: “Effect of PBAT Molecular Weight and POSS Type”, 2019
- Non-Isothermal Crystallization Kinetics of Green Microalgae Filled Poly(Lactic Acid), 2019
- Thermal, mechanical and physical properties of chain extended recycled polyamide 6 via reactive extrusion: Effect of chain extender types, 2019
- Compatibilization of PLA/PBAT blends by using Epoxy-POSS, 2019
- Long- and short-term stability of plasticized poly(lactic acid): effects of plasticizers type on thermal, mechanical and morphological properties, 2019
- Non-isothermal crystallization kinetics of Poly(Butylene succinate) (PBS) nanocomposites with different modified carbon nanotubes, 2018
- Synthesis and Characterization of Novel Copolymers of Poly (isopentenyl PEG - co-allyl PEG), Their Performance in Cement Mortar and Comparison with Physical Blends, 2018
- Effects of Magnesia Incorporation on Properties of Polystyrene/Magnesia Composites, 2018
- Physical, mechanical and neutron shielding properties of h-BN/Gd2O 3/HDPE ternary nanocomposites, 2018
- The effects of POSS particles on the flame retardancy of intumescent polypropylene composites and the structure-property relationship, 2018
- Synthesis of phosphorus- and phenyl-based ROMP polymers and investigation of their effects on the thermomechanical and flammability properties of a polypropylene-IFR system, 2018
- Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites, 2018
- Non-isothermal crystallization kinetics and dynamic mechanical properties of poly(Butylene succinate) nanocomposites with different type of carbonaceous nanoparticles, 2018
- Investigation of relationship between crystallization kinetics and interfacial interactions in plasticized poly(lactic acid)/POSS nanocomposites: “Effects of different POSS types”, 2018
- Investigation of relationship between crystallization kinetics and interfacial interactions in plasticized poly(lactic acid)/POSS nanocomposites: “Effects of different POSS types”, 2018
- The mechanical, thermal and morphological properties of γ-irradiated PLA/TAIC and PLA/OvPOSS, 2018
- Synthesis of phosphorus- and phenyl-based ROMP polymers and investigation of their effects on the thermomechanical and flammability properties of a polypropylene-IFR system, 2018
- Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites, 2018
- Preparation, characterization, and in vitro evaluation of chickenfeather fiber–thermoplastic polyurethane composites, 2017
- Effects of Diisocyanate and Polymeric Epoxidized Chain Extenders on the Properties of Recycled Poly(Lactic Acid), 2017
- High-Performance Green Composites of Poly(lactic acid) and Waste Cellulose Fibers Prepared by High-Shear Thermokinetic Mixing, 2017
- Thermally induced shape memory behavior, enzymatic degradation and biocompatibility of PLA/TPU blends: “Effects of compatibilization”, 2017
- High-Performance Green Composites of Poly(lactic acid) and Waste Cellulose Fibers Prepared by High-Shear Thermokinetic Mixing, 2017
- Non-isothermal crystallization kinetics of PEG plasticized PLA/G-POSS nanocomposites, 2017
- Effects of Diisocyanate and Polymeric Epoxidized Chain Extenders on the Properties of Recycled Poly Lactic Acid, 2017
- Comparison of natural halloysite with synthetic carbon nanotubes in poly lactic acid based composites, 2017
- Nanoclay fibers for the reinforcement of poly lactic acid based composites, 2016
- Investigation of relationship between crystallization kinetics and interfacial interactions in plasticized poly lactic acid POSS nanocomposites Effects of different POSS types, 2016
- Non isothermal crystallization kinetics and dynamic mechanical properties of poly Butylene succinate nanocomposites with different type of carbonaceous nanoparticles, 2016
- The influence of POSS type on the properties of PLA, 2016
- Effects of octamaleamic acid POSS used as the adhesion enhancer on the properties of silicone rubber silica nanocomposites, 2016
- Effects of halloysite nanotubes on the performance of plasticized poly lactic acid based composites, 2016
- Properties of talc wollastonite polyamide 6 hybrid composites, 2015
- Mechanical and Morphological Properties of Buckminster Fullerene C60 Added Glass Fiber Reinforced Polyamide 66 Multiscale Composites, 2015
- Effect of Fiber Content on Failure Modes of Glass Fiber Reinforced Injection Molded Polyamide 66 Composites, 2015
- Dual effect of chemical modification and polymer precoating of flax fibers on the properties of short flax fiber poly lactic acid composites, 2015
- A study on the separation performance of zeolite filled thin film composite poly dimethyl siloxane membrane, 2015
- The Effects of Thermomechanical Cycles on the Properties of PLA TPS Blends, 2014
- Reactive compatibilization of PLA/TPU blends with a diisocyanate, 2014
- Fracture toughness analysis of O POSS PLA composites assessed by essential work of fracture method, 2014
- Thoughening of poly lactic acid with silicone rubber, 2014
- Effects of reactive and nonreactive POSS types on the mechanical thermal and morphological properties of plasticized poly lactic acid, 2014
- Effects of a diisocyanate compatibilizer on the properties of citric acid modified thermoplastic starch poly lactic acid blends, 2013
- Use of Halloysite Nanotubes for the Production of Poly (lactic acid) Nanocomposites, 2013
- A modified method for processing and characterization of organoclay-based poly(ethylene terephthalate) nanocomposite fibers, 2013
- Properties of modified ethylene terpolymer/poly(lactic acid) blends based films, 2013
- Investigation of erosive wear behavior and physical properties of SGF and or calcite reinforced ABS PA6 composites, 2013
- POSS reinforced PET based composite fibers Effect of POSS type and loading level, 2013
- Properties of modified ethylene terpolymer poly lactic acid blends based films, 2013
- Plasticized and unplasticized PLA organoclay nanocomposites Short and long term thermal properties morphology and nonisothermal crystallization behavior, 2012
- Effects of Alkali Treatment on the Properties of Short Flax Fiber Poly Lactic Acid Eco Composites, 2011
- Effects of POSS particles on the mechanical thermal and morphological properties of PLA and Plasticised PLA, 2011
- Properties of thermally conductive micro and nano size boron nitride reinforced silicon rubber composites, 2010
- Interfacial strength in short glass fiber reinforced acrylonitrile-butadiene-styrene/polyamide 6 blends, 2009
- Production of poly(lactic acid)/organoclay nanocomposite scaffolds by microcompounding and polymer/particle leaching, 2009
- Thermally conductive boron nitride/SEBS/EVA ternary composites: “Processing and characterization”, 2009
- Interfacial strength in short glass fiber reinforced acrylonitrile butadiene styrene polyamide 6 blends, 2009
- Thermally conductive boron nitride SEBS EVA ternary composites Processing and characterization, 2009
- Morphology biodegradability mechanical and thermal properties of nanocomposite films based on PLA and plasticized PLA, 2009
- Production of poly lactic acid organoclay nanocomposite scaffolds by microcompounding and polymer particle leaching, 2009
- Effects of microcompounding process parameters on the properties of ABS polyamide 6 blends based nanocomposites, 2008
- Impact essential work of fracture toughness of ABS polyamide 6 blends compatibilized with olefin based copolymers, 2008
- Microcompounding of organoclay ABS PA6 blend based nanocomposites, 2008
- Processing and characterization of multilayer films of poly(ethylene terephthalate) and surface-modified poly(tetrafluoroethylene), 2007
- Effects of olefin based compatibilizers on the morphology thermal and mechanical properties of ABS polyamide 6 blends, 2007
- Short glass fiber reinforced ABS and ABS PA6 composites Processing and characterization, 2005
- Processing and Characterization of Short Glass Fiber/ABS/Polyamide-6 Composites, 2004
- Effects of polyamide 6 incorporation to the short glass fiber reinforced ABS composites an interfacial approach, 2004
- Effect of co-plasticizer type on properties of edible starch films, 2017
- STUDY ON MECHANICAL/THERMAL PROPERTIES AND FRACTURE BEHAVIOR OF PLA TOUGHENED WITH PBAT AND POSS, 2018
- Essential work of fracture toughness analysis of poly(lactic acid) thermoplastic starch blends, 2018
- Investigation of effects of MoEpPOSS nanoparticle on the morphological and rheological properties,
- Investigation of the non-isothermal crystallization kinetics of thermoplastic elastomer toughened polyamide 6 blends,
- Yeni Nesil Nanoparçacıklar ile Uyumlaştırılmış PA6/TPE Harmanlarının Tekrarlı Ekstrüzyon Sonrası Mekanik, Reolojik ve Morfolojik Özelliklerinin İncelenmesi,
- Değişken Süper Emici Polimer Konsantrasyonu ile Poliolefin Temelli Karışımların İşlenebilirliğinin İncelenmesi,
- Süper Emici Polimer ile Hazırlanmış Şişebilen Poliolefin Karışımlarının Özelliklerinin İncelenmesi,
- Rheological and thermal properties of PP/EPDM based thermoplastic vulcanizates: “M-POSS as an alternative coagent”,
- Synthesis of collagen modified PLA biocomposites for tissue engineering applications,
- Investigation of electrical conductivity properties wood-based panels,
- Investigation of the effect of AcryloPOSS loading ratio on the properties of LLDPE fibers,
- Investigation of Self-Healing Properties of Bromobutyl Rubber in the Presence of Novel Hybrid Nanoparticles,
- Reactive polyhedral oligomeric silsesquioxane as a compatibilizer for biopolymer blends,
- A novel approach to improve the performance of TPV via self-nano reinforced network structure,
- Development of self-healing butyl rubber formulations,
- Mühendislik Termoplastiği ile Harmanlanmış Poliester Temelli Termoplastik Elastomerlerin Esas Kırılma Davranışının İncelenmesi,
- PP/EPDM Termoplastik Vulkanizatlarının Mekanik ve Morfolojik Özelliklerine OM-POSS’un Etkisi,
- Monoepoksi POSS ile Uyumlaştırılmış Poliamit 6/Termoplastik Elastomer Karışımlarının Isıl ve Reolojik Özelliklerinin İncelenmesi,
- Rheological and Morphological Properties of Mono-Epoxide POSS Compatibilized PLA/PBS Blends,
- Oktaizobütil Polihedral Oligomerik Silseskuiokzan (O-POSS) ile Uyumlaştırılmış Poliamit 6 (PA6)/Termoplastik Elastomer (TPE) Karışımlarının Esas Kırılma İşinin İncelenmesi,
- Sürekli Fazı Termoplastik Elastomer (TPE) Olan Poliamit 6 (PA6)/TPE Karışımlarının Kristalizasyon Kinetiğine Yeni Nesil Nanotaneciklerin Etkisinin İncelenmesi,
- PTPE/PA6 Karışımlarının Yeni Nesil Hibrit Nanoparçacık Yoluyla Reaktif Uyumlulaştırılması ve Karakterizasyonu,
- Sürekli Fazı Termoplastik Elastomer (TPE) Olan Poliamit 6/TPE Karışımlarının Mekanik ve Morfolojik Özelliklerinin İncelenmesi,
- Akrilo-POSS Nanotacikleri ile Takviye Edilmiş NR/SBR Kompozitlerinin Tekstil Elyaflara Yapışma Davranışının İncelenmesi,
- Bromobütil Kauçuğun Kendi Kendini Yenileyebilme Davranışına Deneysel Parametrelerinin Etkisinin İncelenmesi,
- Polihedral Oligomerik Silseskuiokzan Nanotaneciklerinin EPDM Hamurlarının Reolojik, Mekanik ve Isıl Özelliklerine Etkisinin İncelenmesi,
- Çözelti ve Yığın Polimerizasyonu ile Üretilen PLA’nın Fiziksel Özelliklerine Deneysel Parametrelerin Etkisinin İncelenmesi,
- Üzerine Enjeksiyon Yöntemi ile Üretilmiş Sürekli Cam Elyaf Takviyeli PP/Kısa Cam Elyaf Takviyeli PP Malzemelerin Yapışma Davranışlarının İncelenmesi,
- Süper Emici Polimer Konsantrasyonuna Bağlı Olarak Poliolefin Köpüklerin Özelliklerinin İncelenmesi,
- Etilen Glikol-Alg Yağı Esterleri ile Plastikleştirilmiş PLA’nın Mekanik, Isıl, Termo-Mekanik ve Morfolojik Özelliklerinin İncelenmesi,
- Bitkisel Kökenli Yağların Doğal Kauçuk/Stiren Bütadien Kauçuk Harmanlarında Proses Kolaylaştırıcı Olarak Kullanılabilme Potansiyelinin İncelenmesi,
- Microcompounding of different rubber formulations,
- Preparation and characterization of CNT and CB reinforced tire tread compounds using MC15HT,
- The effect of temperature and crystallization on the adhesion between overmolded PP based composites,
- Effects of MWCNT on mechanical and thermal properties of POM/PBS blends,
- Investigation of mechanical, thermal, crystallographic and morphological properties of OvPOSS/polyethylene fibers,
- Effect of acrylo-POSS nanoparticles on vulcanization kinetics of PP/EPDM based thermoplastic vulcanizate,
- Mechanical and morphological properties of MoEp-POSS nanoparticle compatibilized PA6/TPE blends,
- Mechanical and morphological properties of PP/EPDM based thermoplastic vulcanizates: “A-POSS as coagent”,
- The effects of acrylo-POSS nanoparticles on the adhesion properties of rayon cord and natural rubber skim compounds,
- A new route to dynamically vulcanizate PP/EPDM using chemically hybrid nanostructures,
- Non-isothermal crystallization kinetics of PP/EPDM based thermoplastic vulcanizates: “OV-POSS as a nucleating agent”,
- Foamed polyolefin compounds: processing and characterization,
- Effect of methacryl-POSS nanoparticle on the vulcanization kinetics of PP/EPDM based thermoplastic vulcanizate,
- Rheological and thermal properties of Tri-EpPOSS nanoparticle compatibilized PA6/TPE blends,
- Effect of pre-heating time and mechanical interlocking on the bonding behavior of over-injection molded PP composites,
- Thermal and mechanical properties of PLA/PBS Bioblends compatibilized with mono epoxide POSS,
- Mechanical and Morphological Properties of TriEp-POSS nanoparticle compatibilized PA6/TPE Blends,
- OV-POSS as an alternative coagent for EPDM/PP based thermoplastic vulcanizate: “Comparison of mechanical and morphological properties”,
- A-POSS as an adhesion promoter for nylon 6.6 cord and natural rubber compound,
- Poli(Laktik Asit) (PLA) / Polioksimetilen (POM) Karışımlarının POM Yükleme Oranına Bağlı Olarak Mekanik, Isıl Ve Reolojik Özelliklerinin İncelenmesi,
- TAC ve OV-POSS’un PP/EPDM Karışımlarının Vulkanizasyon Kinetiği Üzerine Etkisi,
- Rheological and thermal properties of PP/EPDM based thermoplastic vulcanizates: “OV-POSS as an alternative coagent,
- Multi- and Mono-epoxide POSS as a potent compatibilizer for PLA/PBS Bioblends,
- Shape memory behavior and physical properties of peroxide x-linked LLDPE-C6/POSS and LLDPE-C8/POSS composites,
- Overmolding of SGF-PP onto a Continuous GF-PP Composite,
- Improvement adhesion of Acrylo-POSS reinforced natural rubber skim compound towards aramid fiber,
- Poliamit Temelli Vaksların Doymuş Poliester Reçinelerin Fiziksel Ve Kimyasal Özelliklerine Etkisinin İncelenmesi,
- LDPE'nin Çapraz Bağlanma Verimliliği ve Fiziksel Özelliklerinin Araştırılması: “ OvPOSS ile Esnek ve Rijit Koajanların Karşılaştırılması”,
- POSS ve TAIC Varlığında Çapraz Bağlanmış LDPE Ve LDPE Kompozitlerinin Şekil Hafıza Davranışı ve Fiziksel Özelliklerinin İncelenmesi,
- Ekmek Atıklarından Termoplastik Nişasta Eldesi Ve Ldpe İle Harmanlarının Karakterizasyonu,
- Glycidyl Poss as a potential compatibilizer for PLA/PBS blends,
- Poliamit 6/ Termoplastik Elastomer Karışımlarının Mekanik, Isıl, Reolojik Ve Morfolojik Özelliklerinin İncelenmesi,
- Kayma hızı ve kovan sıcaklığının EPDM/PP TPV’lerinin mekanik özellikleri üzerine etkisi,
- A-POSS/NR kompozitlerinin poliester elyafa yapışma özelliklerinin incelenmesi,
- LLDPE/OvPOSS/TAIC ve LLDPE/OvPOSS/PEGDMA Kompozitlerinin mekanik, ısıl, reolojik ve şekil hafıza özellikleri,
- Effect of acrylo-POSS nanoparticles on the passenger carcass tire compound properties, 2021
- A recycled TPO automotive applications from painted plastic scraps of car bumpers, 2020
- Rubber toughened chopped carbon fiber reinforced PEIT composites: effect of elastomer content, 2020
- Essential work of fracture toughness analysis of poly(lactic acid) thermoplastic starch blends, 2018
- Antimikrobiyal Polilaktik Asit Filmlerin Hazırlanması ve Termal/Mekanik Özelliklerinin İncelenmesi, 2019
- Antimikrobiyal Polilaktik Asit Filmlerin Hazırlanması Ve Termal/Mekanik Özelliklerinin İncelenmesi, 2019
- Enhanced flame retardancy of polylactide/jute overmolded composites, 2017
- POSS-PCL Yıldız Polimerleri Kullanılarak PLA’ın Termal ve Mekanik Özelliklerinin Geliştirilmesi, 2018
- POSS Merkezli Heterokollu Yıldız Şekilli PCL-PLA Polimerlerinin Sentezi Ve PLA İle Blendlerinin Hazırlanması, 2019
- Investigation of adhesion properties between M-POSS/NR compounds and rayon fiber,
- Investigation of the effect of the new generation hybrid nanoparticles on the compatibility of polymer blends,
- Investigation of Shape Memory Behavior and Physical Properties of Crosslinked Low Density Polyethylene/OvPOSS/TAIC Composites, 2019
- Cross-linked LLDPE Composites in the Presence of POSS Nanoparticles and Poly(ethylene glycol) dimethacrylate Coagent:”Comparison of Physical Properties and Shape Memory Behaviour”, 2019
- Investigation of shape memory behavior and physical properties of cross-linked low density polyethylene/OvPOSS/TAIC composites, 2019
- Cross-linked LLDPE composites in the presence of POSS nanoparticles and poly(ethylene glycol) dimethacrylate coagent: “Comparison of physical properties and shape memory behaviour”, 2019
- Mechanical, thermal, rheological and morphological properties of poly(lactic acid)/ butanol-algae oil esters, 2019
- Peroksit ile çapraz bağlanmış LLDPE/POSS kompozitlerinde termal, mekanik ve reolojik özellikler ile şekil hafıza davranışının incelenmesi, 2018
- Peroksit ile çapraz bağlanmış LDPE/POSS: “Peroksit konsantrasyonu ve POSS türünün fiziksel ve şekil hafıza özelliklerine etkisi”, 2018
- Farklı oranlarda TMPTMA ile çapraz bağlanmış LLDPE karışımlarının özelliklerinin incelenmesi, 2018
- Polyhedral Oligomeric Silsesquioxane (POSS) Polymer Nanocomposites: From Synthesis and Applicaitons, ISBN: 978-0-12-821347-6, 2021
- Poly(vinyl Chloride) Based Composites and Nanocomposites, ISBN: 978-3-031-45375-5, 2023
- Mikroplastiklerden Nanoplastiklere Plastik Kirleticiler, ISBN: 978-625-397-535-7, 2023
- Carbon Based Nanofiilers and Their Rubber Nanocomposites, ISBN: 978-0-12-817342-8, 2019
- Advances in elastomers I ans II: Blends and interpenetrating networks, ISBN: 978-3-642-20924-6, 2013
- Constitutive Models for Rubbers X, ISBN: 978-1-138-03001-5, 2017
- Polymer Surface Modification Relevance to adhesion, ISBN: , 2007
- Plastikler, ISBN: , 2006