Mühendislik ve Doğa Bilimleri Fakültesi

Akademik Kadro

Prof. Dr. Edwin Geo Varuvel

Prof. Dr.
Edwin Geo Varuvel

Makine Mühendisliği

Çalışma Alanları

  • Mühendislik Temel Alanı
  • Makine Mühendisliği
  • Enerji
  • Yenilenebilir Enerji Sistemleri
  • Yakıtlar ve Yanma
  • Scenedesmus dimorphus microalgae biodiesel blends on conventional diesel engines assisted with Al2O3 nanoparticles and hydrogen as secondary fuel, 2025
  • Thermodynamic and emission analysis of waste plastic oil fuelled diesel engine with Ce-Al catalyst-based catalytic converters – An experimental study, 2025
  • Impact of Al2O3, CaO, and Fe2O3 additives on spirulina biodiesel blends in a comparative compression ignition engine study, 2025
  • Enhancing performance and reducing emissions with renewable fuels: Prosopis Juliflora methyl ester–alcohol blends with hydrogen in a compression ignition engine, 2025
  • Hydrogen-enriched lean-burn strategy for gasoline direct injection engine utilizing non-thermal plasma fuel reformer, 2025
  • Impact of hydrogen-assisted combustion in a toroidal re-entrant combustion chamber powered by rapeseed oil/waste cooking oil biodiesel, 2025
  • Eco-friendly perspective of hydrogen fuel addition to diesel engine: An inclusive review of low-temperature combustion concepts, 2025
  • Battery fault diagnosis methods for electric vehicle lithium-ion batteries: Correlating codes and battery management system, 2025
  • A deep learning multi-feature based fusion model for predicting the state of health of lithium-ion batteries, 2025
  • Early Prediction of the Remaining Useful Life of Lithium‐Ion Cells Using Ensemble and Non‐Ensemble Algorithms, 2025
  • Evaluating the Effectiveness of Boosting and Bagging Ensemble Techniques in Forecasting Lithium‐Ion Battery Useful Life, 2025
  • Comparative analysis of regression models to predict the performance of the dual fuel engine operating on diesel and hydrogen gas, 2025
  • Optimization of hydrogen induced combustion and thermal characteristics in simarouba methyl ester-diesel blends for enhanced HCCI engine performance, 2025
  • Experimental investigation on premixed charged compression ignition engine operating on mixture of non-fatty acid camphor oil and Polanga oil, 2025
  • Emission analysis of combustion of cashew nutshell biodiesel in a toroidal combustion chamber: an experimental study, 2024
  • Assessing the impact of sargassum algae biodiesel blends on energy conversion in a modified single-cylinder diesel engine with a silica-incorporated diamond-like coated piston, 2024
  • Experimental investigation of features of CI engine fueled with blends of camphor oil with biomass waste simarouba glauca oil, 2024
  • Exploration of flame characteristics of gasoline engine fuelled by gasoline-pentanol blends using combustion endoscopy, 2024
  • A comparative analysis of advanced machine learning models for the prediction of combustion, emission and performance characteristics using endoscopic combustion flame image of a pine oil–gasoline fuelled spark ignition engine, 2024
  • The combustion of lemon peel oil/gasoline blends in spark ignition engine with high-insulation piston crown coating, 2024
  • Efficacy of machine learning algorithm in estimating oxyhydrogen gas generation system: Electrolyte concentration and current influence on sustainable energy production, 2024
  • Enhanced oxidation resistance and electrochemical performance of PEMFC gas diffusion layer through [EMIM][TFSI] ionic liquid coating, 2024
  • Experimental investigation of ammonia gas as hydrogen carrier in prunus amygdalus dulcis oil fueled compression ignition engine, 2024
  • Influence of brown algae filler and process parameters on the surface roughness and MRR of jute fiber polymeric composite machined by abrasive water jet, 2024
  • Prediction, optimization, and validation of the combustion effects of diisopropyl ether-gasoline blends: A combined application of artificial neural network and response surface methodology, 2024
  • Response surface methodology optimization of characteristics of biodiesel powered diesel engine and its effective integration to autonomous microgrid, 2024
  • Evaluating the potential performance of methane in lean conditions and examining the variations in combustion in a gasoline direct injection engine, 2024
  • Comparative analysis to reduce greenhouse gas (GHG) emission in CI engine fuelled with sweet almond oil using ammonia/after treatment system, 2024
  • Influence of hydrogen-assisted combustion in compression ignition engines fueled with fuel blends of pine oil and waste cooking oil biodiesel using toroidal combustion chamber, 2024
  • Production of liquid hydrocarbon fuels through catalytic cracking of high and low-density polyethylene medical wastes using fly ash as a catalyst, 2024
  • Recent advances and research progress on the role of carbon‐based biomass in ultra‐capacitors: A systematic review, 2024
  • Crafting high‐performance polymer‐integrated solid electrolyte for solid state sodium ion batteries, 2024
  • Impact of the operational parameters of a dual fuel engine operating on a blend of Water Hyacinth biodiesel and Mesua ferrea biodiesel with hydrogen–A clean development mechanism, 2024
  • NOx emission reduction in low viscous low cetane (LVLC) fuel using additives in CI engine: an experimental study, 2024
  • Production of biodiesel from waste fish fat through ultrasound-assisted transesterification using petro-diesel as cosolvent and optimization of process parameters using response surface methodology, 2024
  • A comparative study on bayes classifier for detecting photovoltaic module visual faults using deep learning features, 2024
  • Engine behavior analysis on a conventional diesel engine combustion mode powered by low viscous cedarwood oil/waste cooking oil biodiesel/diesel fuel mixture – An experimental study, 2024
  • Evaluation of wheat germ oil biofuel in diesel engine with hydrogen, bioethanol dual fuel and fuel ionization strategies, 2024
  • Experimental investigations on in-cylinder flame and emission characteristics of butanol-gasoline blends in SI engine using combustion endoscopic system, 2024
  • Exploration of the dual fuel combustion mode on a direct injection diesel engine powered with hydrogen as gaseous fuel in port injection and diesel-diethyl ether blend as liquid fuel, 2024
  • Maximizing efficiency and environmental benefits of an algae biodiesel-hydrogen dual fuel engine through operational parameter optimization using response surface methodology, 2024
  • Quantitative assessment of small-bore gasoline direct injection engine for homogenous stoichiometric lean condition with hydrogen addition in dual fuel mode, 2024
  • A comprehensive review on the applicability of hydrogen and natural gas as gaseous fuel for dual fuel engine operation, 2024
  • A systematic review on biofuel production and utilization from algae and waste feedstocks– a circular economy approach, 2024
  • Techno-economic review assessment of hydrogen utilization in processing the natural gas and biofuels, 2023
  • Influence of hydrogen injection timing and duration on the combustion and emission characteristics of a diesel engine operating on dual fuel mode using biodiesel of dairy scum oil and producer gas, 2023
  • Experimental assessment on the performance, emission and combustion characteristics of a safflower oil fueled CI engine with hydrogen gas enrichment, 2023
  • Comprehensive study on using hydrogen-gasoline-ethanol blends as flexible fuels in an existing variable speed SI engine, 2023
  • Application of Taguchi design in optimization of performance and emissions characteristics of n-butanol/diesel/biogas under dual fuel mode, 2023
  • Exhaust emission control of SI engines using ZSM-5 zeolite supported bimetals as a catalyst synthesized from coal fly ash, 2023
  • Effect of premixed hydrogen on the performance and emission of a diesel engine fuelled with prunus amygdalus dulcis oil, 2023
  • Enhancing the performance of renewable biogas powered engine employing oxyhydrogen: Optimization with desirability and D-optimal design, 2023
  • Synergistic effect of hydrogen and waste lubricating oil on the performance and emissions of a compression ignition engine, 2023
  • Application of machine learning algorithms for predicting the engine characteristics of a wheat germ oil–Hydrogen fuelled dual fuel engine, 2023
  • Exploration of low heat rejection engine characteristics powered with carbon nanotubes-added waste plastic pyrolysis oil, 2023
  • Production of Raphanus Sativus Biodiesel and Its Performance Assessment in a Thermal Barrier‐Coated Agriculture Sector Diesel Engine, 2023
  • Nanofluids as a coolant for polymer electrolyte membrane fuel cells: Recent trends, challenges, and future perspectives, 2023
  • Biodiesel from Biomass Waste Feedstock Prosopis Juliflora as a Fuel Substitute for Diesel and Enhancement of Its Usability in Diesel Engines Using Decanol, 2023
  • Prediction of combustion, performance, and emission parameters of ethanol powered spark ignition engine using ensemble Least Squares boosting machine learning algorithms, 2023
  • Synergetic effect of liquid fuel derived from various waste feedstocks on performance, combustion and emission in a compression ignition engine, 2023
  • Development of artificial neural network and response surface methodology model to optimize the engine parameters of rubber seed oil – Hydrogen on PCCI operation, 2023
  • Impact of hydrogen addition on diesel engine performance, emissions, combustion, and vibration characteristics using a Prosopis Juliflora methyl ester-decanol blend as pilot fuel, 2023
  • Energy, Exergy, and Emission Analysis of Biofuels in Compression Ignition Engine with Camphor Oil as Premixing Fuel, 2023
  • Efficacy of machine learning algorithms in estimating emissions in a dual fuel compression ignition engine operating on hydrogen and diesel, 2023
  • Environmental and energy valuation of waste-derived Cymbopogon Martinii Methyl Ester combined with multi-walled carbon (MWCNTs) additives in hydrogen-enriched dual fuel engine, 2023
  • Investigation on performance of bio synthesized copper nano fluid in helical coil and shell type heat exchanger, 2022
  • Effect of solar photovoltaic and various photovoltaic air thermal systems on hydrogen generation by water electrolysis, 2022
  • Effect of intake port design modifications on diesel engine characteristics fuelled by pine oil-diesel blends, 2022
  • A study on the feasibility of bergamot peel oil-gasoline blends for spark-ignition engines, 2022
  • Experimental study of feasibility of orange peel oil as a partial replacement for gasoline fuel in SI engine with and without MAO coated piston, 2022
  • Recent advancement on thermal management strategies in PEM fuel cell stack: a technical assessment from the context of fuel cell electric vehicle application, 2022
  • Pyrolytic conversion of automotive bumper polywaste to diesel like fuel and its utilization in compression ignition engine, 2022
  • Some studies on reducing carbon dioxide emission from a CRDI engine with hydrogen and a carbon capture system, 2022
  • Environmentally Conscious Manufacturing and Life Cycle Analysis: A State-of-the-Art Survey, 2022
  • Combustion analysis of higher order alcohols blended gasoline in a spark ignition engine using endoscopic visualization technique, 2022
  • A Study on Glycyrrhiza glabra-Fortified Bread: Predicted Glycemic Index and Bioactive Component, 2022
  • Combined effects of various strategies to curtail exhaust emissions in a biomass waste fueled CI engine coupled with SCR system, 2022
  • Biofuel from leather waste fat to lower diesel engine emissions: Valuable solution for lowering fossil fuel usage and perception on waste management, 2022
  • Processing and utilization of an eco-friendly oil as heat transfer fluid derived from camelina seeds, 2022
  • Effect of Alloying Elements and Ceramic Coating on the Surface Temperature of an Aluminum Piston in a Diesel Engine, 2022
  • Effect of hydrogen on compression-ignition (CI) engine fueled with vegetable oil/biodiesel from various feedstocks: A review, 2022
  • Polymer based flow field plates for polymer electrolyte membrane fuel cell and the scope of additive manufacturing: A techno‐economic review, 2022
  • Combined effects of nozzle hole variation and piston bowl geometry modification on performance characteristics of a diesel engine with energy and exergy approach, 2022
  • Experimental investigation and performance prediction of gasoline engine operating parameters fueled with diisopropyl ether-gasoline blends: Response surface methodology based optimization, 2022
  • Ternary gasoline – Pomegranate peel oil (PPO)- tertiary butyl alcohol (TBA) blend as an enabler to improve the spark-ignited engine performance and emissions, 2022
  • An experimental study of the effects of fuel injection pressure on the characteristics of a diesel engine fueled by the third generation Azolla biodiesel, 2022
  • Inedible oil feedstocks for biodiesel production: A review of production technologies and physicochemical properties, 2022
  • Experimental study of droplet combustion and diesel engine characteristics for Azolla biodiesel, 2022
  • Experimental evaluation of a compression ignition engine enacted with biofuel from beverage industry waste and higher grades of alcohol, 2021
  • Moving ahead from hydrogen to methanol economy: scope and challenges, 2021
  • CO2 reduction in a common rail direct injection engine using the combined effect of low carbon biofuels, hydrogen and a post combustion carbon capture system, 2021
  • Optimization of compression ratio and injection timing of a diesel engine Fueled with oxygenated blends using fuzzy logic-based Taguchi method, 2021
  • Mitigation of carbon footprints through a blend of biofuels and oxygenates, combined with post-combustion capture system in a single cylinder CI engine, 2019
  • Mitigation of carbon footprints through a blend of biofuels and oxygenates, combined with post-combustion capture system in a single cylinder CI engine, 2019
  • Comparative assessment of hexanol and decanol as oxygenated additives with calophyllum inophyllum biodiesel, 2019
  • Effect of electrochemical conversion of biofuels using ionization system on CO2 emission mitigation in CI engine along with post-combustion system, 2018
  • Synergistic effect of hydrogen induction with biofuel obtained from winery waste (grapeseed oil) for CI engine application, 2018
  • Effect of ternary blends of bio-ethanol, diesel and castor oil on performance, emission and combustion in a CI engine, 2018
  • Optimization of biodiesel production from animal fat residue in wastewater using response surface methodology, 2013
  • Single zone combustion modeling of biodiesel from wastes in diesel engine, 2013
  • Experimental analysis of biofuel as an alternative fuel for diesel engines, 2012
  • Effects of biofuel from fish oil industrial residue - Diesel blends in diesel engine, 2012
  • Assessment of liquid fuel (bio-oil) production from waste fish fat and utilization in diesel engine, 2012
  • Energy and Exergy for Sustainable and Clean Environment, ISBN: 1865-3529, 2025
  • Thermal Management Systems for E-mobility and other Applications, ISBN: 978-0-443-19017-9, 2025
  • Energy and Exergy for Sustainable and Clean Environment vol 2, ISBN: 1865-3529, 2025